Welcome to visit Xuzhou Yasul High-tech Materials Co., Ltd. Official website!
  • Mobile phone   |

  • WeChat public number   |

  • Baidu map

24hours(+86)0516-

Hotline service phone:

88630586

The cause of porcelain pipe fracture

Release time:2018-11-28 17:53:37      Hit count:1105

What are the causes of porcelain tube fracture? Below are several reasons for small make up, I hope to help daily maintenance of porcelain tube.

(1) the quality of porcelain tube is not in conformity with the requirements of firing speed and temperature.

(2) aging of porcelain tubes.

(3) porcelain tubes are not at the same horizontal plane, and individual porcelain tubes are overloaded.

(4) kiln plates and products are overweight.

(5) there are foreign matters such as stuck to kiln column between porcelain tubes.

(6) the speed is too fast and the torque is too large.

(7) the forward direction is subject to resistance, such as the front speed is slower than the rear speed, resulting in excessive resistance and torque.

(8) the porcelain tube is separated from the clamp for a long time, without rotation and deformation under pressure.

(9) when the kiln is stopped, the transmission motor closes too early, and the kiln plate is not removed, causing the porcelain pipe to stop rotating under high temperature and bend under pressure.

(10) the porcelain pipe was shot by the nozzle for a long time, and the local high temperature deformation.

(11) long-term contact wear of porcelain pipe and kiln brick, etc.


News you are interested in
Previous:Note for porcelain tube replacement operation
Next:Introduction to quartz ceramic roll

Back to list